10.1 Inch PCAP touch panel + TFT with optical bonding
Optical bonding technology: Optical bonding technology is using optical glue TP assembly LCD and touch panel together without air. It's different from traditional adhesive bonding products. For traditional adhesive bonding products, double sided adhesive is pasted around four edges, there is still air gap between touch panel and LCD. For optical bonding products, there is glue the whole surface of the LCD. Dust and fog can't go inside. And the display effect will be great.
Features of optical bonding product:
1.Since there is no gap between LCD and touch panel after assembly, dust and fog can't go inside the module.
2.There will be low interference of LCD to touch panel.
3.Vivid and clear crystal display performance than ordinary bonding method.
4.Improved hardness, vibration resistance of TFT module
Description Of Touch Panel: Capacitive Touch Panel is to use the working current of induction of human body.The operational principle of the projected capacitive touch panel: There are two layers of the ITO layer under the surface of glass. This ITO layer respectively forms the electric field of X axis and Y axis, which can keep balance by crossing the surface of the class. Once the fingers approach the glass surface, the fingers and the electrode X axis or Y axis will form a new electric field, which can make the local capacitance change. Then the controller will determine the location based on capacitance changes.
Advantages of Touch-China:
1. We have 23-year experience in designing and manufacturing touch panels.
2. We have a strong research team for both software and hardware and provide before and after-sale service.
3. We cooperate with excellent customer and suppliers.
4. We have long-term cooperation with excellent IC suppliers all over the world.
5. We have good guarantee for product quality and lead time.
6. Our touch panels of large sizes and touch panels for automobile are in a leading position in touch panel industry.
LVDS Interface Pin Define:
CN1 socket(Module size):FI-X30HL (JAE)
| Pin NO. | Symbol | Signal |
| 1 | RXO0- | Pixel data |
| 2 | RXO0+ | Pixel data |
| 3 | RXO1- | Pixel data |
| 4 | RXO1+ | Pixel data |
| 5 | RXO2- | Pixel data |
| 6 | RXO2+ | Pixel data |
| 7 | GND | Ground |
| 8 | RXOCLK- | Pixel clock |
| 9 | RXOCLK+ | Pixel clock |
| 10 | RXO3- | Pixel data |
| 11 | RXO3+ | Pixel data |
| 12 | RXE0- | Pixel data |
| 13 | RXE0- | Pixel data |
| 14 | GND | Ground |
| 15 | RXE1- | Pixel data |
| 16 | RXE1+ | Pixel data |
| 17 | GND | Ground |
| 18 | RXE2- | Pixel data |
| 19 | RXE2+ | Pixel data |
| 20 | RXECLK- | Pixel clock |
| 21 | RXECLK+ | Pixel clock |
| 22 | RXE3- | Pixel data |
| 23 | RXE3+ | Pixel data |
| 24 | GND | Ground |
| 25 | NC | Do not connect |
| 26 | NC | Do not connect |
| 27 | NC | Do not connect |
| 28/29/30 | VDD | Power Supply Input Voltage 5V |
Product Specification of Optical Bonding Touch Module
| Items | Parameters |
| LCD Screen Size | 10.1 inch |
| Aspect ratio | 4:3 |
| Resolution | 1280×1024 |
| Visible Area | H)337.92mm×(V)270.336mm |
| Viewing Angle | 85/85/80/80 (Typ.)(CR≥10) |
| Contrast Ratio | 1000:1 |
| Response Time | 3.5/1.5 (Typ.)(Tr/Td) ms |
| Colors D | 8Bit 16.7M , 72% NTSC |
| Scanning Frequency | 60Hz |
| Interface | LVDS(See 1.2 for details) |
| Operation Voltage | 5v |
| Back light Source | WLED |
| LCD | BOE |
| Operating Lift of backlight | Min. 30K hours |
| Operation Voltage | 37.7V~44.2V (for reference) |
| Operation Current | Typ current:60ma |
| BLU Power consumption | Max. 10.6W(for reference) |
| Touch Screen Type | 10 point G+G capacitive touch panel |
| Touch Mode | Finger or capacitor pen |
| Response Speed | 10ms |
| Reported Rate | 100Hz |
| Resolution | ≥4096×4096 |
| Touch Times | Durable single-point≥30 million times |
| Interface | USB |
| Working Voltage | Typical value+5VDC |
| Glass Thickness | Total 2.45mm±0.2(Cover1.1mm+SCA0.25mm+Senser1.1mm) |
| Surface Treatment | NO |
| Surface Durability | Surface hardness equals glass, Moh's hardness level≥7 |
| Transmittance | ≥85% |
| Bonding Way | Optical bonding |
| Bonding Material | OCA |
| Thickness | 0.175mm |
| Modele Size | (W)421mm×(H)346mm×(T)14.8mm |
| Net Weight | 1.98KG |
| Working Temperature | 0℃~+50℃ |
| Storage Temperature | -20℃~+60℃ |
| Working Humidity | ≤85%RH(non-condensing) |
| Storage Humidity | ≤85%RH(non-condensing) |
.
Touch Module Drawings:
Product Tags:
|
|
10.1 Inch Touch LCD Module PCAP Touch Panel TFT With OCA Optical Bonding Images
|
